SOFTWARES.
Measuring & Evaluation.
Measuring softwares & Evaluation softwares
Measuring Softwares
KrabDroid 2.0
RC Droid 3.0
Krab OnBoard 2.0
Salamander 2.0
Evaluation Softwares
Krab 11
Gekon 11
Salamander 10
RWT 8.2
Measuring Softwares
Application KRABdroid 2.0
KrabDroid 2.0 is a software providing measurement of track geometry (including switches) and rail profiles while KRAB measuring trolley is used. The software is intuitive and simple, all measured data are displayed in real time. The data gained during measurement are stored in device used (smartphone, tablet) for further evaluation in the office, after the measurement is done. The software is designed for devices equipped with Android operating system.
RC Droid 3.0 is a software providing measurement of track microgeometry while GEKON or 3D GEKON measuring trolleys are used. The software allows to measure with one or both measuring units simultaneously. The software is intuitive and simple, all measured data are displayed in real time (even in graphical form and basic statistics). The data gained during measurement are stored in device used (smartphone, tablet) for further evaluation in the office, after the measurement is done. The data gained during measurement using RC Droid 3.0 are stored in .kzv files and then evaluated in Gekon 11 software. The software is designed for devices equipped with Android operating system.
Krab OnBoard 2.0 is a software providing measurement of track geometry, rail profiles, corrugation and clearance profile, while KRAB, GEKON or GEKON 3D measuring trolley is used. The software is intuitive and simple, all measured data can be displayed in real time in the form of a graph. After the measurement is done, the data gained during measurement can be stored in a device used (tablet, PC), or downloaded into a removable drive (flash drive) for further evaluation in the office. The software is designed for devices equipped with Windows operating systems.
Salamander 2.0 is a software providing measurement of track microgeometry – corrugation and rail acoustic roughness, while SALAMANDER measuring trolley is used. The software is intuitive and simple, all measured data are displayed in real time. The data gained during measurement are stored in device used (smartphone, tablet) for further evaluation in the office, after the measurement is done. The software is designed for devices equipped with Android operating system.
Evaluation Softwares
Krab 11 is an evaluation software designed for working with data taken during the measurement with KRAB trolley on tracks.
The trolley is mainly used to measure track geometry and rail profiles (included Switch measurement).
The main function of the Krab 11 software is to calculate values of these variables using mathematical procedures according to EN 13848 in wavebands: D1 (1-25 m) and D2 (25 – 70 m) and to calculate rail head wear in different angles.
The program is designed for Windows operating system, while the measured data are stored in .kzv or .krx data files.
All calculated data can be displayed in form of tables or graphs.
The rail profiles data are visualized in form of curves compared with chosen referential rail profile.
All calculated data can be also printed.
Software is using Google Earth to show measured track on a map.
Main outcomes and functions provided by the Krab 11 software:
⦁ Local defects table
⦁ Local defects summary
⦁ Section evaluation, TI, TQI
⦁ Statistics
⦁ Graphs of the track geometry signals
⦁ Comparison of signals and data files
⦁ .csv data table, .xlsx data table
⦁ Rail Profiles section evaluation table
⦁ Rail Profiles
⦁ Wear signals in graphical form (lateral, vertical, angle)
⦁ Track video
⦁ GPS location, Google maps
⦁ Switch evaluation
Gekon 11 is an evaluation software designed for evaluation of data gained during the measurement with GEKON, or GEKON 3D trolley on tracks. The trolley is used to measure corrugation and rail profiles of the track. The main function of software Gekon 11 is to calculate values of these variables using mathematical procedures according to EN 13848 in five wavebands: D1 (0-30 mm), D2 (30 – 100) mm, D3 (100-300 mm), D4 (300-1000 mm) and D5 (1000- 3000 mm), and to calculate rail head wear in different angles. The program is designed for Windows operating system, while the measured data are stored in .kzv data files.
All calculated data can be displayed in form of tables or graphs. The rail profiles data are visualized in form of lines compared with chosen referential rail profile. All calculated data can be also printed out.
Software is using Google Earth to show measured track on a map.
Outcomes:
⦁ Graphical outcome of corrugation signals in D1 – D5 wavebands (Peak to Peak Number exceeding, Moving average methods)
⦁ Section evaluation (%, RMS, Corrugation statistics, Grind report…)
⦁ Statistics
⦁ 1/3 Octave analysis
⦁ Comparison of signals and data files
⦁ .xlsx, .cvs data tables
⦁ Rail profiles
⦁ Wear signals in graph form (Vertical, Lateral, Angle)
⦁ GPS, Google maps
⦁ Track video
RWT 8.2 is an evaluation software designed for working with data gained during the measurement with RWT trolley on special concrete tracks.
The trolley is mainly used to measure track geometry and rail profiles.
The main function of the RWT 8.2 software is to calculate values of these variables using mathematical procedures and to provide multiple outcomes in the form of tables or graphs.
All calculated data and outcomes can be also printed.
The program is designed for the Windows operating system, while the measured data is stored in .rwx data files.
Salamander 10 is an evaluation software designed for evaluation of data gained during the measurement with SALAMANDER trolley on tracks. The trolley is used to measure roughness and noise level of tracks. The main function of the Salamader 10 software is to calculate values using mathematical procedures according to EN 15610 in five wavebands: D1 (0-30 mm), D2 (30 – 100) mm, D3 (100-300 mm), D4 (300-1000 mm) and D5 (1000- 3000 mm). Second important function of the software is to provide graphical output of the roughness and of the 1/3 Octane analysis. The software is designed for Windows operating system, while the measured data are stored in .slmd data files.
All calculated data can be displayed in form of several tables or graphs. All calculated data can also be printed out.
Outcomes:
⦁ Graphical outcome of roughness signals in D1 – D5 wavebands (Peak to Peak Number exceeding, Moving average methods)
⦁ 1/3 Octave analysis in graph form
⦁ Section evaluation
⦁ Statistics
⦁ Comparison of signals and data files
⦁ .xlsx, .csv data tables
